40/100G QSFP Breakout AOC
10Gtek® QSFP+ to 8LC Active Optical Cable (AOC) QDR is a high data rate parallel cable, which is designed to overcome the bandwidth limitation of traditional copper cable. It offers 4 independent data transmission channels and 4 data receiving channels via the multimode ribbon fibers, each channel is able to achieve the rate of 10Gb/s.
The 10Gtek® QSFP+ to four SFP+ 40Gbps fanout Active Optical Cable is an adaptor cable which provides connectivity between device using QSFP+ port on one end and SFP+ ports on the other end. The integrated cable transmits 4x10Gbps data on the QSFP+ side and 1x10Gbps data on the SFP+ side in duplex over a loose tube fiber with distance up to 100m. The fanout AOC is SFF-8431 (SFP+ side) and SFF-8436 (QSFP+ side) compliance.
The 10Gtek® AOC-Q44S-xxx is a VCSEL-based, cost-effective 100GbE to 4x25GbE active optical splitter cable (AOC) designed for use in 100GbE Ethernet systems.The AOC-Q44S-xxx is compliant with SFF-8402 for the SFP28 ends and with SFF-8665 for the QSFP28 end. It provides connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other side, such as a switch and four servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the QSFP28 end to the single pair of each on the SFP28 ends. Each QSFP and SFP port comprises an EEPROM providing product and status monitoring information which can be read by the host system.
Electrical: IBTA V2 Revision 1.2.1 and 1.3
IEEE 802.3ba
SFF-8436
SFF-8431
SFF-8432
SFF-8472
SFF-8402
SFF-8665/SFF-8636
- InfiniBand 4X SDR, DDR, QDR and FDR
- Ethernet 10G, 40G
- FiberChannel 10G, 40G, SAN
- Rack-to-Rack, Shelf-to-Shelf Interconnect Top of Rack (TOR) Switch
- Networking, Storage
- Hubs, switches, routers, servers Supercomputer, HPC
| P/N | Data Rate (bps) |
Description | Length (meter) |
Cable Type | Power | BER |
| AOC-Q1C2-010 | 40 G | QSFP+ to LC Connetor Optical Cable | 10 | MMF OM3 | <1.05W | <10^(-15) |
| AOC-Q1C2-015 | 40 G | QSFP+ to LC Connetor Optical Cable | 15 | MMF OM3 | <1.05W | <10^(-15) |
| AOC-Q1C2-020 | 40 G | QSFP+ to LC Connetor Optical Cable | 20 | MMF OM3 | <1.05W | <10^(-15) |
| AOC-Q1C2-030 | 40 G | QSFP+ to LC Connetor Optical Cable | 30 | MMF OM3 | <1.05W | <10^(-15) |
| AOC-Q1C2-050 | 40 G | QSFP+ to LC Connetor Optical Cable | 50 | MMF OM3 | <1.05W | <10^(-15) |
| AOC-Q1C2-100 | 40 G | QSFP+ to LC Connetor Optical Cable | 100 | MMF OM3 | <1.05W | <10^(-15) |
- InfiniBand 4X SDR, DDR, QDR and FDR
- Ethernet 10G, 40G
- FiberChannel 10G, 40G, SAN
- Rack-to-Rack, Shelf-to-Shelf Interconnect Top of Rack (TOR) Switch
- Networking, Storage
- Hubs, switches, routers, servers Supercomputer, HPC
| P/N | Data Rate (bps) |
Description | Length (meter) |
Cable Type | Power | BER |
| AOC-Q14S-005 | 40 G | QSFP+ to 4x SFP+ AOC Breakout Cable | 5 | MMF OM3 | SFP+: <0.35W QSFP+: <1.05W | <10^(-15) |
| AOC-Q14S-010 | 40 G | QSFP+ to 4x SFP+ AOC Breakout Cable | 10 | MMF OM3 | SFP+: <0.35W QSFP+: <1.05W | <10^(-15) |
- Programmable Tx Input EQ and Rx Output Amplitude and Pre-Emphasis
- Single 3.3V Power with Low Power of 2.5W (QSFP28) and 0.8W (SFP28)
- Support up to 70/100m via OM3/OM4
- Bit Error Ratio (BER): 10E-12
- Ethernet for 100GBASE-SR4
- Infiniband EDR, FDR, QDR
- HPC Interconnects
QSFP28 End
- Bit rate support from 25Gbps to 28Gbps
- Low power consumption: <0.8W
- SFP+ housing with enhanced EMI shielding
- Support up to 70m by active optical cable with OM3 fiber
- Applicable to 25G Ethernet
- High capacity IO with SFP+ interface
- Data Center and in-rack connection
| P/N | Data Rate (bps) |
Description | Length (meter) |
Cable Type | Power | BER |
| AOC-Q44S-005 | 100 G | QSFP28 to 4x 25G SFP28 AOC Breakout Cable | 5 | MMF | SFP28: <0.8W QSFP28: <2.5W | <10^(-12) |
| AOC-Q44S-007 | 100 G | QSFP28 to 4x 25G SFP28 AOC Breakout Cable | 7 | MMF | SFP28: <0.8W QSFP28: <2.5W | <10^(-12) |
| AOC-Q44S-010 | 100 G | QSFP28 to 4x 25G SFP28 AOC Breakout Cable | 10 | MMF | SFP28: <0.8W QSFP28: <2.5W | <10^(-12) |
| AOC-Q44S-015 | 100 G | QSFP28 to 4x 25G SFP28 AOC Breakout Cable | 15 | MMF | SFP28: <0.8W QSFP28: <2.5W | <10^(-12) |
| AOC-Q44S-020 | 100 G | QSFP28 to 4x 25G SFP28 AOC Breakout Cable | 20 | MMF | SFP28: <0.8W QSFP28: <2.5W | <10^(-12) |
Products
Products Search
Follow 10Gtek
Association Joined
How to buy
