10Gtek® Breakout DAC cable offer a cost-effective copper link to establish 1 QSFP port to 1~4 SFP ports, TOR switch is the major application. 

40G QSFP+ Breakout DAC, QSFP+ to 4x SFP+, provides 4 separate 10G data links, application in 40G Ethernet, infiniband QDR and Omni-path. 

56G QSFP+ Breakout DAC, QSFP+ to 4x SFP+, provides 4 separate 14G data links, application in 40G Ethernet, infiniband QDR/FDR and Omni-path. 

100G QSFP28 Breakout DAC, QSFP28 to 4x SFP28, provides 4 separate 25G data links, application in 100G Ethernet, infiniband EDR and Omni-path. 

10Gtek® offers customization service for color/length/jack options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

10Gtek’s 25G NICs also use Intel XXV710 series chips. These NICs come in 2 ports, supporting SFP28 slot. These cards are supporting Windows, Linux, Red Hat, SUSE, Ubuntu, VMware ESXi and other operating systems.

10Gtek’s 100G NICs support 100GbE application. 100G NICs use Mellanox ConnectX-4 series chips. These NICs come in 1~2 ports, supporting QSFP28 slot. These cards are supporting Windows, Linux, Red Hat, SUSE, Ubuntu, VMware ESXi and other operating systems.

10Gtek® QSFP+ to 8LC Active Optical Cable (AOC) QDR is a high data rate parallel cable, which is designed to overcome the bandwidth limitation of traditional copper cable. It offers 4 independent data transmission channels and 4 data receiving channels via the multimode ribbon fibers, each channel is able to achieve the rate of 10Gb/s.

The 10Gtek® QSFP+ to four SFP+ 40Gbps fanout Active Optical Cable is an adaptor cable which provides connectivity between device using QSFP+ port on one end and SFP+ ports on the other end. The integrated cable transmits 4x10Gbps data on the QSFP+ side and 1x10Gbps data on the SFP+ side in duplex over a loose tube fiber with distance up to 100m. The fanout AOC is SFF-8431 (SFP+ side) and SFF-8436 (QSFP+ side) compliance.

The 10Gtek® AOC-Q44S-xxx is a VCSEL-based, cost-effective 100GbE to 4x25GbE active optical splitter cable (AOC) designed for use in 100GbE Ethernet systems.The AOC-Q44S-xxx is compliant with SFF-8402 for the SFP28 ends and with SFF-8665 for the QSFP28 end. It provides connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other side, such as a switch and four servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the QSFP28 end to the single pair of each on the SFP28 ends. Each QSFP and SFP port comprises an EEPROM providing product and status monitoring information which can be read by the host system.

10Gtek® offers customization service for color/length/jack/fiber type options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

10Gtek® QSFP+ DAC based on IEEE 802.3ba and compliant MSA SFF-8436, application in 40G Ethernet, infiniband QDR and Omni-path. 

40G QSFP+ Breakout DAC, QSFP+ to 4x SFP+, provides 4 separate 10G data links, 

56G QSFP+ Breakout DAC, QSFP+ to 4x SFP+, provides 4 separate 14G data links.

100G QSFP28 Breakout DAC, QSFP28 to 2x QSFP+, QSFP28 to 4x SFP28.

10Gtek® offers customization service for color/length/jack options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

10Gtek® QSFP-DD (Double-Density) passive copper cable assemblies provide 8 data transmission channels at speeds up to 25Gbps/lane NRZ and 50Gbps/lane PAM4. It enables 200G/400G in application, with lengths 0.5-2 meters.

10Gtek® QSFP-DD DAC cable supports Ethernet and InfiniBand.

10Gtek® QSFP28 active optical cables (AOC) are high-performance active optical cables with bi-directional signal transmission and aggregate 100-Gbps bandwidth for both Infiniband EDR and Ethernet 100G-SR4 applications. Compared to conventional copper cables, longer and lighter optical cables enable the ease of complicated data-center cablings. The AOCs utilize multimode fiber with 850-nm VCSELs and PIN PDs. The certificated cables have superior signal integrity and bit error rate, which enables reliable operation performance.

10Gtek® offers customization service for color/length/jack/fiber type options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

QSFP+Loopback

QSFP/QSFP+ passive electrical loopback is used for testing QSFP/QSFP+ transceiver ports in board level test. By substituting for a full-featured QSFP/QSFP+ transceiver, the electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing.

Attenuation options are available in nominal and attenuated versions including 0db, 3.5db and 5db; power options are 1W, 2.5W, 3.5W; plug in and out can reach to 500times.

QSFP28 Loopback

QSFP28 passive electrical loopback is used for testing QSFP28 transceiver ports in board level test. By substituting for a full-featured QSFP28 transceiver, the electrical loopback provides a cost effective low loss method for QSFP28 port testing.

Attenuation options are available in nominal and attenuated versions including 0db, 3.5db and 5db; power options are 1W, 2.5W, 3.5W; plug in and out can reach to 500times.

QSFP+Loopback

QSFP/QSFP+ passive electrical loopback is used for testing QSFP/QSFP+ transceiver ports in board level test. By substituting for a full-featured QSFP/QSFP+ transceiver, the electrical loopback provides a cost effective low loss method for QSFP/QSFP+ port testing.

Attenuation options are available in nominal and attenuated versions including 0db, 3.5db and 5db; power options are 1W, 2.5W, 3.5W; plug in and out can reach to 500times.

QSFP28 Loopback

QSFP28 passive electrical loopback is used for testing QSFP28 transceiver ports in board level test. By substituting for a full-featured QSFP28 transceiver, the electrical loopback provides a cost effective low loss method for QSFP28 port testing.

Attenuation options are available in nominal and attenuated versions including 0db, 3.5db and 5db; power options are 1W, 2.5W, 3.5W; plug in and out can reach to 500times.

10Gtek® QSFP28 active optical cables (AOC) are high-performance active optical cables with bi-directional signal transmission and aggregate 100-Gbps bandwidth for both Infiniband EDR and Ethernet 100G-SR4 applications. Compared to conventional copper cables, longer and lighter optical cables enable the ease of complicated data-center cablings. The AOCs utilize multimode fiber with 850-nm VCSELs and PIN PDs. The certificated cables have superior signal integrity and bit error rate, which enables reliable operation performance.

10Gtek® offers customization service for color/length/jack/fiber type options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

10Gtek® QSFP+ to 8LC Active Optical Cable (AOC) QDR is a high data rate parallel cable, which is designed to overcome the bandwidth limitation of traditional copper cable. It offers 4 independent data transmission channels and 4 data receiving channels via the multimode ribbon fibers, each channel is able to achieve the rate of 10Gb/s.

The 10Gtek® QSFP+ to four SFP+ 40Gbps fanout Active Optical Cable is an adaptor cable which provides connectivity between device using QSFP+ port on one end and SFP+ ports on the other end. The integrated cable transmits 4x10Gbps data on the QSFP+ side and 1x10Gbps data on the SFP+ side in duplex over a loose tube fiber with distance up to 100m. The fanout AOC is SFF-8431 (SFP+ side) and SFF-8436 (QSFP+ side) compliance.

The 10Gtek® AOC-Q44S-xxx is a VCSEL-based, cost-effective 100GbE to 4x25GbE active optical splitter cable (AOC) designed for use in 100GbE Ethernet systems.The AOC-Q44S-xxx is compliant with SFF-8402 for the SFP28 ends and with SFF-8665 for the QSFP28 end. It provides connectivity between system units with a QSFP28 port on one side and up to four different SFP28 ports on the other side, such as a switch and four servers. The cable connects data signals from each of the 4 MMF (Multi Mode Fiber) pairs on the QSFP28 end to the single pair of each on the SFP28 ends. Each QSFP and SFP port comprises an EEPROM providing product and status monitoring information which can be read by the host system.

10Gtek® offers customization service for color/length/jack/fiber type options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.   

100G to 25G QSFP28 Adapter

10Gtek® CVT-Q/Q-Cage-XXX, QSFP28 Extender, CVT-S/S-Cage-XXX, SFP+ Extender,  are designed to be applied for immersion solution. It extends the interfaces to surface, aiming to realize the interconnection of transceivers and AOC cables.

10Gtek® offers customization service for color/length/jack options and connector matrix link.  If you need customized services, please contact info@10gtek.com for more details.