SFP+ Active Cable Specifications and Alternate Test Methods —— Chapter 1 Scope of This Specification
SFF Committee
SFF-8461 Specifications for SFP+ Active Cable Specifications and Alternate Test Methods —— Chapter 1 Scope of This Specification
Contents Chapter 1 Scope of This Specification
Contents
1.1Introduction..............................................................................................................1
1.2The SFP+ Supported Standards.........................................................................1
1.3ESD...........................................................................................................................2
1.1 INTRODUCTION
This specification defines cabling solutions compatible with SFP+ linear or limiting host for 10.3125 GBd operation based on “SFI”. For detailed SFI specifications and test methodology, see SFF-8431.This specifications also defines an alternative passive cable test method based on cable S-parameters. The S-parameters method provides parameters for cable VMA loss, VCR, dWDP, and Vcm.
SFP+ active and passive cable assemblies are hot pluggable and are powered by individual power connections for the transmitter (VccT) and the receiver (VccR). Multiple modules can share a single 3.3 V power supply with individual filtering for each VccT and VccR. Detailed power supply specifications are given in SFF-8431 Chapter 2.
The SFP+ cable assemblies compatible with SFI (SFF-8431) could be active-active, active-passive, passive-active, or passive-passive implementations and may support one or more of the applications listed in Table 1.
SFP+ cable assemblies are either compatible with host supporting linear modules or a host supporting limiting module as defined in SFF-8431 Chapter 3.5.
1.2 THE SFP+ SUPPORTED STANDARDS
SFF8461 aable assembly may comply with any combination of the standards shown in Table 1, and may be suitable for other or future standards. This specification does not preclude operation at other signalling rates that are not listed in this table, such as 2.125 GBd for 2GFC, or 4.25 GBd for 4GFC.
1.3 ESD
The active and passive cable assemblies SFI contacts (High Speed Contacts) shall withstand 1000 V electrostatic discharge based on Human Body Model per JEDEC JESD22-A114-B.
The active and passive cable assemblies contacts with exception of the SFI contacts (High Speed Contacts) shall withstand 2 kV electrostatic discharge based on Human Body Model per JEDEC JESD22-A114-B.
The active and passive cable assemblies shall meet ESD requirements given in EN61000-4-2, criterion B test specification such that units are subjected to 15 kV air discharges during operation and 8 kV direct contact discharges to the case.
****************************************
The above information is edited by 10GTEK.
10GTEK TRANSCEIVERS CO., LTD (Hereinafter refered to as 10GTEK) is specialized in developing and manufacturing Fiber Optical Transceivers and High Performance Cables which are wildly applied in Datacon, Telecom and CATV, providing customers with top quality and cost effective products. The prompt response and excellent customer support contribute to clients‘ full satisfaction.Today, 10GTEK has been growing fast in the optical field for its unique and competitve excellence which has got a high attention from datacom and telecom.
