QSFP-DD/OSFP/QSFP112 (400G)

 

 

10Gtek's 400G QSFP-DD DAC cable(CAB-Q400/Q400-PxM) primarily enables high-bandwidth 400G links and supports 400G Ethernet rate. It provides a QSFP-DD-to-QSFP-DD copper direct-attach solution. 400G QSFP-DD DAC cables are suitable for very short links and offer a cost-effective way to establish a 400-Gigabit link between QSFP-400G ports of switches/routers within racks and across adjacent racks.
10Gtek currently offers passive copper cables in lengths of 0.5, 1, 1.5, 2 and 2.5 meters.

10Gtek's 400G QSFP-DD to 2x200G QSFP56 Passive Direct Attach Copper Breakout Cable (CAB-Q400/2Q56-PxM) application is "break-out" DAC assembly which is a hybrid transition from a QSFP-DD on one terminal to two individual QSFP56 on the other. The QSFP-DD to two parallel bi-directional channels each operating at up to 200Gbps.

10Gtek's 400G QSFP-DD to 4x QSFP56 breakout copper cable (CAB-Q400/4Q56-PxM) provideS robust connections for leading edge systems. Passive copper cables require no additional power to ensure quality connectivity. The passive copper cables are fully compliant with QSFP-DD Rev 3.0 specification and provide connectivity between devices using QSFP DD ports. 10Gtek’s CAB-Q400/4Q56-PxM passive copper cables fill the need for short, cost-effective connectivity in the data center.

10Gtek's 400G QSFP-DD to 8x SFP56 breakout copper cable (CAB-Q400/8S56-PxM) provideS robust connections for leading edge systems. Passive copper cables require no additional power to ensure quality connectivity. The passive copper cables are fully compliant with QSFP-DD Rev 3.0 specification and provide connectivity between devices using QSFP DD ports. 10Gtek’s CAB-Q400/8S56-PxM passive copper cables fill the need for short, cost-effective connectivity in the data center.

10Gtek's 400GBase-CU OSFP-RHS to OSFP-RHS direct attach cable(OO-4XND-PxM)operates over passive copper with a maximum reach of 2m. It has been programmed, uniquely serialized, and data-traffic and application tested to ensure it is 100% compliant and functional. This direct attach cable is built to comply with MSA (Multi-Source Agreement) standards.

10Gtek's 400G OSFP to 2x QSFP56 breakout passive cable assembly (O2Q-8X50-PxM) and 400G OSFP to 4x QSFP56 breakout passive cable assembly (O4Q-8X50-PxM) provides new generation performance of OSFP to QSFP56 by higher date transfer rate. At the same time, 10Gtek O2Q-8X50-PxM and O4Q-8X50-PxM cable choose dual side drain cable and self-designed PCBA, providing low loss, less skew and better NEXT. 360 degree EMI crimping shielding and Zinc Die-cast shell designing make the product high-performance. All the designing is based on the industry standard specifications, such as SFF-8679, SFF-8636, OSFP MSA specification rev 1.91 and SFF-8665 MSA specification.

10Gtek's 400G OSFP to QSFP-DD passive cable assembly (OQD-8X50-PxM) provides new generation performance of OSFP to QSFP-DD by higher date transfer rate. At the same time, 10Gtek OQD-8X50-PxM cable choose dual side drain cable and self-designed PCBA, provide low loss，less skew and better NEXT. 360 degree EMI crimping shielding and Zinc Die-cast shell designing make the product high-performance. And all the designing is based on the industry standard specifications, such as SFF-8679, SFF-8636, OSFP MSA specification rev 1.91 and QSFP DD MSA specification rev4.0.

10Gtek's 400G QSFP112 Direct Attach Cable (CAB-Q112/Q112-PxM) is a 4-channel parallel copper direct attach cable for storage, data center, andhighperformance computing connectivity. It offers 4 independent data transmission channels and 4 data receiving channels via the copper cable, the aggregate data rate of 400Gbps over 2 meters transmission can be achieved with this product. The 400G QSFP112 DAC offers reliable connectivity and is compliant with IEEE802.3ck and CMIS MSA standards.

QSFP-DD (400G)

  • Backward compatible with QSFP+ and QSFP28 modules
  • Length: 0.5~2.5 meters
  • Passive
  • MCU
  • 30/26AWG
  • Low power consumption
  • Excellent EMI performance
  • Temp. Range (℃): 0~70
  • Ethernet 40G, 100G, 200G, 400G
  • InfiniBand NDR, HDR, EDR, QDR
  • Rack-to-Rack, Shelf-to-Shelf Interconnect
  • TOR (Top of Rack)
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q400/Q400-P0.5M 400G QSFP-DD, 0.5-m, 30AWG Passive 0.5 30 MCU
CAB-Q400/Q400-P1M 400G QSFP-DD, 1-m, 30AWG Passive 1 30 MCU
CAB-Q400/Q400-P1.5M 400G QSFP-DD, 1.5-m, 30AWG Passive 1.5 30 MCU
CAB-Q400/Q400-P2M 400G QSFP-DD, 2-m, 26AWG Passive 2 26 MCU
CAB-Q400/Q400-P2.5M 400G QSFP-DD DAC 2.5-m, 26AWG Passive 2.5 26 MCU
CAB-Q400/Q400-P3M 400G QSFP-DD DAC 3-m, 26AWG Passive 3 26 MCU

QSFP-DD to (2) QSFP56

  • Backward compatible with QSFP+ and SFP56 modules
  • Length: 0.5~2 meters
  • Passive
  • MCU
  • 30/26AWG
  • Low power consumption
  • Excellent EMI performance
  • Temp. Range(℃): 0~70
  • Ethernet 40G, 100G, 200G, 400G
  • InfiniBand NDR, HDR, EDR, QDR
  • Rack-to-Rack, Shelf-to-Shelf Interconnect
  • TOR (Top of Rack)
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q400/2Q56-P0.5M 400G QSFP-DD to (2) QSFP56 DAC 0.5-m, 30AWG Passive 0.5 30 MCU
CAB-Q400/2Q56-P1M 400G QSFP-DD to (2) QSFP56 DAC 1-m, 30AWG Passive 1 30 MCU
CAB-Q400/2Q56-P1.5M 400G QSFP-DD to (2) QSFP56 DAC 1.5-m, 30AWG Passive 1.5 30 MCU
CAB-Q400/2Q56-P2M 400G QSFP-DD to (2) QSFP56 DAC 2-m, 26AWG Passive 2 26 MCU
CAB-Q400/2Q56-P2.5M 400G QSFP-DD to (2) QSFP56 DAC 2.5-m, 26AWG Passive 2.5 26 MCU
CAB-Q400/2Q56-P3M 400G QSFP-DD to (2) QSFP56 DAC 3-m, 26AWG Passive 3 26 MCU

QSFP-DD to (4) QSFP56

  • Compliant with QSFP-DD MSA Specification Rev 3.0
  • SFF‐8679 electrical interface compliant
  • SFF‐8636 management interface support
  • Compliant with SFF-8665
  • Compliant with IEEE802.3cd Standard
  • Support 50G (PAM4) electrical data rates/channel
  • I2C for EEPROM communication
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS
  • Low EMI radiation Switches, servers and routers
  • Data Center networks
  • Storage area networks
  • High performance computing
  • Telecommunication and wireless infrastructure
  • Medical diagnostics and networking
  • Test and measurement equipment
  • Multi-platform service systems
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q400/4Q56-P0.5M 400G QSFP-DD to (4) QSFP56 DAC 0.5-m, 30AWG Passive 0.5 30 MCU
CAB-Q400/4Q56-P1M 400G QSFP-DD to (4) QSFP56 DAC 1-m, 30AWG Passive 1 30 MCU
CAB-Q400/4Q56-P1.5M 400G QSFP-DD to (4) QSFP56 DAC 1.5-m, 30AWG Passive 1.5 30 MCU
CAB-Q400/4Q56-P2M 400G QSFP-DD to (4) QSFP56 DAC 2-m, 26AWG Passive 2 26 MCU
CAB-Q400/4Q56-P2.5M 400G QSFP-DD to (4) QSFP56 DAC 2.5-m, 26AWG Passive 2.5 26 MCU
CAB-Q400/4Q56-P3M 400G QSFP-DD to (4) QSFP56 DAC 3-m, 26AWG Passive 3 26 MCU

QSFP-DD to (4) DSFP56

  • Compliant with QSFP-DD MSA Specification Rev 3.0
  • SFF‐8679 electrical interface compliant
  • Compliant with SFF-8665
  • Compliant with IEEE802.3cd Standard
  • Support 50G (PAM4) electrical data rates/channel
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS
  • Low EMI radiation Switches, servers and routers
  • Data Center networks
  • Storage area networks
  • High performance computing
  • Telecommunication and wireless infrastructure
  • Medical diagnostics and networking
  • Test and measurement equipment
  • Multi-platform service systems
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q400/4D56-P1M 400G QSFP-DD to (4) DSFP56 DAC 1-m, Passive, 30AWG Passive 1 30 MCU
CAB-Q400/4D56-P1.5M 400G QSFP-DD to (4) DSFP56 DAC 1.5-m, Passive, 30AWG Passive 1.5 30 MCU
CAB-Q400/4D56-P2M 400G QSFP-DD to (4) DSFP56 DAC 2-m, Passive, 26AWG Passive 2 26 MCU
CAB-Q400/4D56-P2.5M 400G QSFP-DD to (4) DSFP56 DAC 2.5-m, Passive, 26AWG Passive 2.5 26 MCU

QSFP-DD to (8) SFP56

  • Compliant with QSFP DD MSA Specification Rev 3.0
  • SFF‐8679 electrical interface compliant
  • SFF‐8636 management interface support
  • Compliant with SFF-8402
  • Compliant with IEEE802.3cd Standard
  • Support 50G (PAM4) electrical data rates/channel
  • I2C for EEPROM communication
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS
  • Low EMI radiation Switches, servers and routers
  • Data Center networks
  • Storage area networks
  • High performance computing
  • Telecommunication and wireless infrastructure
  • Medical diagnostics and networking
  • Test and measurement equipment  
  • Multi-platform service systems
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q400/8S56-P0.5M 400G QSFP-DD to (8) SFP56, 0.5-m, 30AWG Passive 0.5 30 MCU
CAB-Q400/8S56-P1M 400G QSFP-DD to (8) SFP56, 1-m, 30AWG Passive 1 30 MCU
CAB-Q400/8S56-P1.5M 400G QSFP-DD to (8) SFP56, 1.5-m, 30AWG Passive 1.5 30 MCU
CAB-Q400/8S56-P2M 400G QSFP-DD to (8) SFP56, 2-m, 26AWG Passive 2 26 MCU
CAB-Q400/8S56-P2.5M 400G QSFP-DD to (8) SFP56, 2.5-m, 26AWG Passive 2.5 26 MCU
CAB-Q400/8S56-P3M 400G QSFP-DD to 8xSFP56, 3-m, 26AWG Passive 3 26 MCU

OSFP-RHS

  • OSFP-RHS Module Compliant to OSFP MSA
  • Transmission Data Rate Up to PAM4 106.25Gbps Per Channel
  • Enable 400Gbps to 400Gbps Transmission (4x100G, CH1-CH4)
  • Built-In EEPROM Functions
  • Operating Temperature Range: 0℃ to 70℃
  • RoHS Compliant and Lead-Free
  • Nvidia CX7 NIC or other devices with 400G OSFP-RHS ports
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
OO-4XND-P0.5M(RHS) 400G OSFP-RHS to OSFP-RHS DAC 0.5-m, Passive, 30AWG Passive 0.5 30 MCU
OO-4XND-P1M(RHS) 400G OSFP-RHS to OSFP-RHS DAC 1-m, Passive, 30AWG Passive 1 30 MCU
OO-4XND-P1.5M(RHS) 400G OSFP-RHS to OSFP-RHS DAC 1.5-m, Passive, 26AWG Passive 1.5 26 MCU
OO-4XND-P2M(RHS) 400G OSFP-RHS to OSFP-RHS DAC 2-m, Passive, 26AWG Passive 2 26 MCU

OSFP

  • Data Rate: 28G NRZ & 56G PAM-4 Per Channel Total Bandwidth 400 Gbps (8 Lane 56G PAM-4)
  • Low Power Consumption
  • Excellent SI Performance
  • Management Interface follows CMIS Standard and can be customized
  • Custom Colors for Pull Tab
  • High-Performance Computing (HPC)
  • Network Interface Cards (NIC's)
  • Data Center and Enterprise Storage Systems
  • Telecommunication Equipment
  • 400Gbps Ethernet
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
OO-8X50-P0.5M 400G OSFP to OSFP DAC 0.5-m, Passive, 30AWG Passive 0.5 30 MCU
OO-8X50-P1M 400G OSFP to OSFP DAC 1-m, Passive, 30AWG Passive 1 30 MCU
OO-8X50-P2M 400G OSFP to OSFP DAC 2-m, Passive, 30AWG Passive 2 30 MCU
OO-8X50-P3M 400G OSFP to OSFP DAC 3-m, Passive, 26AWG Passive 3 26 MCU

OSFP to (2) QSFP56

  • Compliant with OSFP MSA Specification Rev 1.91
  • Compliant with SFF-8665 MSA Specification
  • SFF‐8679 electrical interface compliant
  • SFF‐8636 management interface support
  • Compliant with IEEE802.3cd Standard
  • Support 25G and 50G (PAM4) electrical data rates/channel
  • I2C for EEPROM communication
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS 
  • Data center & Networking Equipment
  • Servers/Storage Devices
  • High Performance Computing (HPC)
  • Switches/Routers
  • common uses.
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
O2Q-8X50-P0.5M 400G OSFP to (2) QSFP56 DAC 0.5-m, Passive, 30AWG Passive 0.5 30 MCU
O2Q-8X50-P1M 400G OSFP to (2) QSFP56 DAC 1-m, Passive, 30AWG Passive 1 30 MCU
O2Q-8X50-P1.5M 400G OSFP to (2) QSFP56 DAC 1.5-m, Passive, 30AWG Passive 1.5 30 MCU
O2Q-8X50-P2M 400G OSFP to (2) QSFP56 DAC 2-m, Passive, 26AWG Passive 2 26 MCU
O2Q-8X50-P3M 400G OSFP to (2) QSFP56 DAC 3-m, Passive, 26AWG Passive 3 26 MCU

OSFP to (4) QSFP56

  • Compliant with OSFP MSA Specification Rev 1.91
  • Compliant with SFF-8665 MSA Specification
  • SFF‐8679 electrical interface compliant
  • SFF‐8636 management interface support
  • Compliant with IEEE802.3cd Standard
  • Support 25G and 50G (PAM4) electrical data rates/channel
  • I2C for EEPROM communication
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS 
Data center & Networking Equipment
Servers/Storage Devices
High Performance Computing (HPC)
Switches/Routers
common uses.
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
O4Q-8X50-P1M 400G OSFP to (4) QSFP56 DAC1-m, Passive, 30AWG Passive 1 30 MCU
O4Q-8X50-P2M 400G OSFP to (4) QSFP56 DAC 2-m, Passive, 26AWG Passive 2 26 MCU
O4Q-8X50-P3M 400G OSFP to (4) QSFP56 DAC 3-m, Passive, 26AWG Passive 3 26 MCU

OSFP to QSFP DD

  • Compliant with OSFP MSA Specification Rev 1.91
  • Compliant with QSFP DD MSA Specification Rev 4.0
  • SFF‐8679 electrical interface compliant
  • SFF‐8636 management interface support
  • Compliant with IEEE802.3cd Standard
  • Support 25G and 50G (PAM4) electrical data rates/channel
  • I2C for EEPROM communication
  • Pull to Release latch design
  • Excellent EMI/EMC performance 360degree cable shield termination
  • Low loss, stronger mechanical features
  • Operating Case Temperature: 0℃~70
  • Compliant with RoHS 
  • Data center & Networking Equipment
  • Servers/Storage Devices
  • High Performance Computing (HPC)
  • Switches/Routers
  • common uses.
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
OQD-8X50-P0.5M 400G OSFP to QSFP DD DAC 0.5-m, Passive, 30AWG Passive 0.5 30 MCU
OQD-8X50-P1M 400G OSFP to QSFP DD DAC 1-m, Passive, 30AWG Passive 1 30 MCU
OQD-8X50-P1.5M 400G OSFP to QSFP DD DAC 1.5-m, Passive, 30AWG Passive 1.5 30 MCU
OQD-8X50-P2M 400G OSFP to QSFP DD DAC 2-m, Passive, 30AWG Passive 2 30 MCU
OQD-8X50-P2M 400G OSFP to QSFP DD DAC 2-m, Passive, 26AWG Passive 2 26 MCU
OQD-8X50-P2.5M 400G OSFP to QSFP DD DAC 2.5-m, Passive, 26AWG Passive 2.5 26 MCU
OQD-8X50-P3M 400G OSFP to QSFP DD DAC 3-m, Passive, 26AWG Passive 3 26 MCU

QSFP112

  • Compliant with QSFP MSA specification Rev 1.0
  • SFF-8679 electrical interface compliant
  • CMIS management interface support
  • I2C for EEPROM communication
  • Excellent EMI/EMC performance 360 degreecableshield termination
  • Advantage dual side pre-solder automated assembly technologies
  • IEEE802.3ck
  • RoHS Compliant
Data center & Networking Equipment
Servers/Storage Devices
High Performance Computing (HPC)
Switches/Routers
common uses.
P/N Description Passive
Active		 Length
(meter)		 AWG I2C
CAB-Q112/Q112-P0.5M 400G QSFP112 DAC 0.5-m, Passive, 30AWG Passive 0.5 30 MCU
CAB-Q112/Q112-P1M 400G QSFP112 DAC 1-m, Passive, 30AWG Passive 1 30 MCU
CAB-Q112/Q112-P1.5M 400G QSFP112 DAC 1.5-m, Passive, 26AWG Passive 1.5 26 MCU
CAB-Q112/Q112-P2M 400G QSFP112 DAC 2-m, Passive, 26AWG Passive 2 26 MCU

Copyright © 2008-2019 10gtek transceivers co., ltd. all rights reserved